Ball Lock Liquid Disconnect, 1/4" Barbed

Just used this for the first time on a new keg of homebrew and it attaches easily and there is no leaking. Will buy more.

These are good quality liquid connects. The Poppets are plastic with a standard oring that is replaceable. The Barb is a true 1/4 so 3/16 will fit if the hose is pliable enough and 1/4 is a no brainier. I Do not believe 5/16 will work reliably even with hose clamps. The Barb appears to be stainless as i haven't noticed any loss in the surface condition. If clearance is really tight you can keep the profile of hose lower with these compared to the Threaded version.

Haven't had any issues yet. Easy to slip on tubing after it soaks in hot water for a bit.

Been kegging for about 2 years now and the only reason I have to buy them is when adding an additional keg. Mine have been banged around pretty good and still have a leak proof seal. Make sure you unscrew the tops and clean out the spring and seal between brews!

A little expensive, but it does the job well.

It easily attaches to my ball lock kegs and doesn't leak. Quality product.

I purchased two of these and after two months of yse have had no problems with them.

It's relatively cheap to buy and it works very well. I haven't had any problems using it with my cornelius kegs. Just make sure you know what size your lines are, otherwise you might have to purchase an adapter to make it work.

These ball lock quick disconnects are the only ones I will buy, Quality and dependabillity are without question. I recommend these for all your ball lock kegs. I will buy from NO OTHERS! Thanks Midwest

These disconnects work as they should.
They are reasonably priced and good quality.
I bought a bunch for several projects and all were of consistently good quality.