Gift Card
Call Us Toll-Free 888.449.2739

Cooler Kit Basic Gott / Rubbermaid Conversion Kit - Brass No Barb

$24.99

Product Number: 7553

Availability: In stock

These innovative products are the highest quality available. All you need is a 7/8" drill bit. "Why pay a welder?" BrewLogic's entry level Gott/ Rubbermaid fitting is anything but basic. The stainless steel bulkhead fitting provides a watertight seal, and a 1/2" NPT port for attaching a quick disconnect fitting or 1/2" NPT barb on the outside of the cooler, or a 12" Boil Screen or 1/2" NPT barb on the inside of the kettle. The attached ball valve is brass.

Customer Reviews

9 People have reviewed this product

Overall Rating: 4.3

Add Your Review
Set Ascending Direction

Easy to attach Review by Fontack

(Posted on 2/28/14)

Product Rating:

I have a rubbermaid cooler and this took little effort to attach. Use some Teflon tape and maybe another washer and you wont have leaks.

No leaks Review by Huber

(Posted on 11/26/13)

Product Rating:

I converted my Rubbermaid cooler with it. It was simple and I haven't had any leaks.

Easy instillation on a rubbermaid cooler Review by Sam

(Posted on 3/18/13)

Product Rating:

I recommend adding Teflon tape to the threads on the outside of the cooler. I had a small leak, but once I added more Teflon tape it stopped leaking. Overall it works fine.

Multiple leak tests and some frustration but it works Review by Calmncents

(Posted on 1/28/13)

Product Rating:

My ten gallon igloo was troublesome. I needed another washer and lots of teflon tape. I'll probably make one from the hardware store next time.

good quality Review by Lonnie

(Posted on 11/23/12)

Product Rating:

I ended up not being able to use half of the pieces in this with my cooler, which was frustrating, but the pieces were al high quality. A little pricey.

Pretty Good Review by Brandon

(Posted on 11/22/12)

Product Rating:

Easy to install and works fine, just make sure you use enough Teflon tape. I used it on a 10 gallon Rubbermaid cooler.

Great for DIY Review by Adam

(Posted on 11/15/12)

Product Rating:

This kit works great for those who want to take control of their All Grain setup. Use this with a rubbermaid cooler to turn it into a mashtun with very little dead space. Very easy installation.

Great Product Review by Hophead73

(Posted on 5/26/12)

Product Rating:

Installed onto a 5gallon Rubbermaid round cooler. Easy instillation. Definitely recommend adding more teflon tape to the threads on the outside of the cooler. Had a small leak, but once I added more teflon it sealed up perfectly.

Good product Review by QauckBoom

(Posted on 11/6/10)

Product Rating:

Installed two of these in 10 gallon and 5 gallon round Rubbermaid coolers. They went in perfectly the first time with no leaks and no fuss. Good installation instructions included with the assemblies.

Set Ascending Direction