FREE SHIPPING on orders over $59 - Limited Time Offer!
Call Us Toll-Free 888.449.2739

Fermenter's Favorites™ Plastic Bottle Filler

$2.99

Product Number: 7202

Availability: In stock

The Fermenter's Favorites Plastic Bottle Filler is an economical bottle filler that uses gravity to shut off the liquid flow. Simply push the filler down on the bottom of the bottle until the beer or wine reaches the top, and after removing the filler, the perfect amount of head space is created. This bottle filler uses the 5/16" tubing.

Height 13"
Diameter 5/16"

Customer Reviews

59 People have reviewed this product

Overall Rating: 4.2

Add Your Review
Set Ascending Direction
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Foolproof Review by Koosman

(Posted on 3/15/14)

Product Rating:

Nothing to fail or break, it works correctly every time. It leaves a reasonable head space, not too much or too little.

Beats using a clip Review by Millburn

(Posted on 3/3/14)

Product Rating:

Its a lot nicer using this filler than a clip on the tubing. You get a lot more control, but it can spray if you tap it too hard.

Bottle Filler Review by Jesse

(Posted on 1/26/14)

Product Rating:

Works Great! Very reliable, the check valve works every time. For cleaning i like to hold it against the side of the bucket open and push cleaner from the raking cane. Great product.

A-ok! Review by Macaille

(Posted on 12/15/13)

Product Rating:

This tool makes filling from the bottom very easy and measuring headspace a breeze. At times the tip will stick open but with a little wiggle as you remove it from the bottle, it solves that minor issue. We always bottle on the door of our dishwasher to eliminate the need to do too much floor cleanup so a little spillage here and there is no biggie.

Fool proof Review by Hank

(Posted on 12/7/13)

Product Rating:

It doesn't leak, though beer runs down from when it adheres to the side when its in a filled bottle. Spring loaded is better beacuse its less likely to spray if you bump it.

get the sprint tipped one Review by Dan

(Posted on 10/22/13)

Product Rating:

The hair trigger causes lot of squirts and mess. I much prefer the sprint tipped model, though it's harder to clean and may eventually need to be discarded.

Works fine for me Review by Buckeyeguy

(Posted on 9/11/13)

Product Rating:

Leaves good headspace. Only problem I have had with mine was when I was bottling a raspberry wheat, a seed got stuck in the tip and it didn't stop the flow. After it was cleaned, it worked great again.

Helps out when bottling Review by Andrew

(Posted on 9/4/13)

Product Rating:

Its a pretty handy piece of equipment when it comes to filling bottles. I can fill the bottles to the exact level I want and there is less chance of aerating the beer since the bottles are filled from the bottom up.

Awesome Review by Shawn

(Posted on 8/4/13)

Product Rating:

These are fantastic. They are simply constructed and use the weight of the liquid coming through to stop or control the flow. I have bottled numerous beers with this and I couldn't be happier. Literally works like a charm. And they are so cheap you can throw them out when they get too old or messy.

drips a little Review by Black

(Posted on 8/2/13)

Product Rating:

It sure beats clamping the plastic tubing and dipping in each bottle. This is almost effortless. When it gets to the top, pull it out and move on to the next bottle.
When done I rinse with water, then a little soapy water, then more rinsing.

Set Ascending Direction
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Fermenter's Favorites™ Plastic Bottle Filler

Recommended Products