The Better-Bottle SimpleFlo valve can be used as an in-line valve for hoses or as an outlet for pails and Better-Bottle carboys. The valve is designed so it can be disassembled and reassembled for cleaning or inspection without tools in a matter of seconds, and its wide, simple flow path resists clogging. The valve opens and closes in the blink of an eye, but it can also be set to any position in between. The SimpleFlo valve is opened fully by pulling on the wire ring until the plunger stops, and it closed fully by pushing down on the plunger until it stops. Rotating the plunger with the wire ring as the plunger is pulled or pushed makes fine adjustments of partial flows easier. The input side of the valve is designed to push into 1/2" ID soft plastic tubing and to mate in quick-disconnect fashion with the
Better-Bottle Racking Adapter (sold separately) and Pail Adapters. The output side is designed to make connection with 1/2", 3/8", and 1/4" ID soft plastic tubing and rigid or semi-rigid 3/8" OD tubing. A 3/8" OD bottle filling tube will push into the output very nicely.
Note: A.K.A. "High Flow Valve"
