Nylon Extra Large Straining Bag- 2' x 3'- Coarse Mesh

Perfect bag for all grain brewing with a turkey fryer kettle and/or Igloo cooler.

I built a RIMS (Recirculating Infusion Mash system) that pumps the wort from the bottom of the mash tun, thru a heat exchanger and back into the mash tun. Even though I have a false bottom, I was getting a stuck mash early in the brew, until I tried one of these strainer bags. These work great to keep the coarse grains under control but still let the wort make it into circulation. They clean up well and I can reuse one several times before they start to break down. I couldn't un my system without one!

this bag made it very easy not to get a stuck sparge it fits the 10 gal water cooler with a rubber band around the top woks well

i use three of these bags to "brew in a bag". i have put close to 10 pounds of dry grain in these at times and never had a tear or seem failure when hoisting them out at the end of the mash (soaked and heavy). they have lasted many batches and i am replacing them because of holes i put in them from catching them on a steel mesh platform i made to keep them off the bottom of the pot. they do a fine job of keeping the grains in, i wish there were a fine mesh version in this size though.

I bought two of the for brew-in-a-bag. I split the grains between two bags because the grains are very heavy after mashing, and you have to stand over the kettle and hold the hot bag up in the air until it drains. With two bags, it's twice as easy!

The mesh is actually semi-fine, and does pretty well straining out the solids from the mash, however the beer does come out a little cloudy.

I got this to use for BIAB and it worked perfectly for it

A good starter choice for a bag for BIAB, before buying a custom made bag. Its not too fine, so it drains easily. It may allow a bit too much flour in your wort, so your trub will be larger.
Still a good deal.

I made an all grain beer using this bag using the BIAB technique. The bag works pretty well, though it doesn't fit the pot as well as a custom bag.

I used this for my first BIAB. There was some sediment in the bottom but this bag is strong and will hold a lot of grain.

Fits around my 21.5QT Granite brewpot. Worked well for a BIAB. Lets some flour into the wort, but that's to be expected.