FREE SHIPPING on orders over $59 - Limited Time Offer!
Call Us Toll-Free 888.449.2739

Small Tubing clamp

$0.59

Product Number: 7110

Availability: In stock

Our small tubing clamp fits either the 5/16" or 3/8" inch tubing. A clamp can allow you to control the rate of flow while siphoning, or use it while you are filling your bottles. Simply clamp it tight to stop the flow, and open it up when you are ready for the liquid to begin again.

Customer Reviews

11 People have reviewed this product

Overall Rating: 4.0

Add Your Review
Set Ascending Direction
  1. 1
  2. 2

Leaks slightly but you cant beat the price and I'd buy another Review by Jason

(Posted on 8/6/13)

Product Rating:

leaks slightly when clamped but its a good price and I'd still buy it again. I have another one from Amazon and it leaks the same... I don't think you're going to find a perfect one for under a buck so I'll give it 5 stars. :)

ehhhhh Review by Trev

(Posted on 5/22/13)

Product Rating:

Not really a useful tool so I perfected siphoning without getting any sediment. No need for this thing if you get good with the siphon.

Cheap but basically useless Review by John

(Posted on 4/11/13)

Product Rating:

Unless I am doing something wrong this is totally useless. It is very cheap but if it doesn't work why waste 59 cents.

clamp Review by monkey

(Posted on 4/9/13)

Product Rating:

This is a handy little unit as it will let you control the speed of your siphon...or pinch it off all together. I don't use it every time, but it has come in handy.

Great/necessary piece of equipment. Review by Greg

(Posted on 3/20/13)

Product Rating:

This is necessary to stop the trub from going into your bottling bucket. The seal can be pretty decent you just have to clip it tightly. I've never personally had any issues with it leaking trub into the bottling bucket. They can be somewhat fragile so having a few on hand is a good idea, especially for the price.

Not quite as useful as I thought Review by Evan

(Posted on 3/13/13)

Product Rating:

I purchased this because it was part of the beginner's kit, but it doesn't work nearly as well as I'd like. At full clamping, it only slows down the flow through a 5/16" tube, and I don't really think it slows it that much. Honestly, I don't really see that much use for it with my setup anyway, so I wouldn't necessarily recommend this for your average brew setup.

Great gadget Review by Ray

(Posted on 2/22/13)

Product Rating:

This tubing clamp works great when siphoning your brew/ wine. Keep it towards the lower end of the tubing and you can quickly cut off the flow before any sediment gets through. It has helped me keep my creations sparkling clear.

Priced Right but Finky and need Two Review by Jason

(Posted on 1/18/13)

Product Rating:

I have trouble with getting a slow pull of the wort with this clamp. I ended up having to use two of these in order to get the slow flow rate that I want. I have to use it on the most closed setting and even that puts too much liquid through, if I go one step more then the flow stops fully.

Good in series or as a back-up Review by Benjamin

(Posted on 12/31/12)

Product Rating:

I use this as a back-up for my bottling wand, sometimes moving bottles around or whatever you hit the nozzle and beer or wine starts flowing. I set this clamp to help prevent spills, if not using a wand I suggest using two, as I agree a single clamp still allows a little to flow around the sides.

Worked ok, now broken Review by DC

(Posted on 12/30/12)

Product Rating:

My clamp worked for about 3.5 years before it broke on me. About 30-40% of the time it did not hold a tight seal and liquid would still leak anyway. But for 59 cents it does the job.

Set Ascending Direction
  1. 1
  2. 2
Small Tubing clamp

Recommended Products