DetailsDitch the auto-siphon and defy gravity: the Anti-Gravity Transfer Pump Kit is a bite-sized package that revolutionizes your brewery’s efficiency. Forget about lifting heavy kegs and carboys. This kit, complete with self-priming pump, tubing, and a premium stainless steel racking cane, lets you simply flip a switch to move any liquid imaginable from one vessel to another. Sit back, relax, have a beer, and watch the magic happen.
Transfer from primary to secondary, conical to keg, carboy to barrel - the possibilities are endless!
We realize you won't be able to actually defy gravity, but this little pump has some incredible lifting abilities that allow you to send your beverages from the floor up to your awaiting vessel.
⅜” barbed and threaded inlet/outlet connections with integrated locking tubing collars
Max Flow: 1 GPM
Suction Ability: 5 Feet
8 ft. Cord
Max Lift: 150 Feet
Food Safe Head
Temp Rating: up to 140 degrees F
Voltage: 12v (Adapter included)
Integrated dampening mounting feet
Includes: Anti-Gravity Transfer Pump, 24” Stainless Steel Racking Cane, and 10’ 5/16” ID Tubing
- Details & Instructions
4.3 / 5.014 ReviewsGreat ProductThis pump has reduced the amount of residue during racking process, made a huge difference. It does struggle if you try to pump from the floor to a higher elevation, but I was probably pushing the limits on the head pressure.May 12, 2019Purchased
3 months agoA real back saver.A little cumbersome with the tubing etc, but works well, and saves the back a lot of work. I would recommend if you are getting tired of moving carboys around.March 17, 2019Purchased
4 months agoWasn't good for meThe product worked well but I have always used the half inch siphon for transferring wine to the carboy. The transfer pump is 3/8 inch and therefore is slower than what I am doing. It is also noisier. It's a good product, just not for me.March 1, 2019Purchased
5 months agoOkay pump for the priceWorks well about half the time but the check valves within the pump keep jamming about every other time you start a transfer. Only way to fix it is to pop off the cover and reset them. Not very difficult but just a pain. It is a handy pump for only $50 some bucks compared to most of the other pumps being $150+ but you get what you pay for I guessFebruary 26, 2019Purchased
6 months agoWorks as expected, speeds up the process greatly.February 20, 2019Purchased
6 months agoGreat productGreat product. Saved me lots of time .February 11, 2019Purchased
6 months agoJanuary 29, 2019Purchased
6 months agoHandy but hard to handleGreat little self-priming pump to transfer liquids between containers. However, handling is a little tricky and it would be great to have three hands. The hoses can have a mind of their own, especially if they are cold. I attached magnets to the feet of the pump so I could stick it on the kegerator. Otherwise, you need to hold each of the hoses, and the pump, and work the on/off switch. Without the help of the magnetic feet, I would need another person to assist.January 13, 2019Purchased
7 months agoNo More lifting full carboys!!I have recently gone to using 1/2 BBL kegs as a fermenter and a freezer with a controller to ferment in. This caused some problems in that I cannot lift a full keg up high enough to transfer by gravity and my March pump is not self-priming. This little baby really did the trick, no priming necessary and it is small and simple to use. It does vibrate a lot more than a centrifugal pump, which is to be expected for a diaphragm pump, so am thinking I will probably mount it to a piece of plywood to help with that. Although I am very happy with the pump I do have some advice for those who buy it. First, I should have cut my 10 feet of hose a bit differently. I cut the input piece to 3 ft and the output to 7, should have tested it in my freezer first, 4 and 6 would have been a better choice. Second, the Stainless Steel racking cane is perfect for a carboy, but just a little short for a keg, so it leaves about 3 gallons of liquid in the bottom, I will either buy a longer racking cane or just add a small piece or tubing to the end, so a minor thing, but it would be nice to have the option of a longer racking cane. The other thing that I thought could be better is that the sediment tip is very loosely held in place and fell into the fermenter on my first try, but this is minor. Overall I am very happy with it and it saves my back!December 16, 2018Purchased
8 months agomulti purpose pumpI use this pump with racking cane to run PBW and Star San through my 6 beer lines vs a corny keg and CO2. Pumping the same though my brewing hoses back to the bucket and back again gets the hoses clean. Rather than dumping my 14 gal Blichmann conical after cleaning, I use the racking cane to suck all the cleaner out. Rather than lifting buckets of solution and dumping them, the pump does all the work. 1 gal bottles of cider and mead can be moved with no O2 fears. (I purge the line with CO2 first.. The only problem, and it is vexing me to no end, is the cap on the racking cane. It falls off regularly. Let me rephrase that, it falls off all the time at the most inconvenient times. I think I'd rather have a screw on cap. It is amazing how many uses I've come up with.December 12, 2018
- Customer Q&A
Browse 1 question Browse 1 question and 4 answersCan you add a filter to get more dead yeast out when transferring from carboy to keg.with this anti gravity transfer pump?if so how?BEST ANSWER: Short answer: no. I don't see how a filter could separate out dead yeast because it is usually a very thin layer on top of the live yeast. The pump pulls about a gallon a minute which is too strong to draw out a layer of yeast. This is not what the pump is intended for.