DetailsThis product is excellent for removing stubborn fermentation residues and organic deposits. Also great for removing labels from beer bottles. Use 1 tablespoon per gallon of water. 8 ounces of this cleanser is enough to make 14 gallons of solution.
- Details & Instructions
5.0 / 5.025 Reviewsremoving labels and goo with B-brightAs a home brewer on a budget I am often given bottles by friends and family, much to my dismay most just present me with a unwashed slightly smell bottle. Be bright takes the old crusty stuff and the smells out with very little work on my part. Hot water and let them soak for awhile then bottle brush and they are good as new. Let them soak longer and labels slip off, excellent product. woodsMarch 11, 2016EffectiveAs the descriptions says, this stuff is GREAT for removing labels from beer bottles. I used to soak bottles my friends gave me in a solution of bleach and hot water for about an hour, then scrape the labels with a razor blade scraper and clean the glue residue off with an abrasive sponge.. With this stuff aJanuary 10, 2011Perfect for label removalThis stuff MELTS off the labels and if you let it sit long enough, there isn't a hint of residue to wipe off either.June 18, 2011Great productIf you need to remove label's this is the stuff for you. Label's just slide off. Container is kind of small but well worth it.December 13, 2011Good cleanerI used this to clean my primary 5 gallon fermentor. It did a nice job removing all of the residue.November 12, 2012Works great, takes a while to disolveWorks great, takes a while to disolve though. It seems to leave a bit of chemical grains at the bottom that never want to fully disolve. Never had any problems with it. I usually mix up just a 1/2 gallon worth of solution in a growler and wash everything all at once. Then I keep that solution till set aside in the growler till time to wash everything after the brewing is done. Makes one container last quite a while.November 22, 2012Great stuffLike others have said....this is the stuff to use when removing labels. I mix up a 3 gal solution in my 40qt kettle and bring it to boil. Dip each bottle in for a few minutes and the labels just fall off. Great time saver!December 29, 2012Great productI was a skeptic going into my experience; I heard of the miracles it performed with bottle labels. I reuse commercial bottles for every brew, since I can get friends to give me their bottles, and I work at a restaurant which I can snag used bottles. Removing labels was always the very worst part about "bottling time" when it came around. I used this product once, and it blew my mind. I put 8oz all at once in a 120qt plastic container and let +150 bottles all soak at once. Half of the labels came off in the soak without me even touching them._x000D__x000D_Amazing, miraculous stuff.February 11, 2013Excellent productThis was amazing at removing the labels, did have a couple of labels that still did not want to come off. Let them soak a couple hours and the label just falls off with little effort. Like other reviews it does take some time for it to dissolve totally.February 16, 2013Labels be gone!As the descriptions says, this is amazing at removing labels from beer bottles. It sure beats the hour long soak in a Chlorine solution and then the scraping. With the BBrite I give it 20 minutes and slide the labels off. The residual glue easily wipes off.March 22, 2013
- Customer Q&A