DetailsThis clip or clamp attaches to a fermenting bucket or carboy to hold a 1/2" auto-siphon in place.
- Details & Instructions
4.2 / 5.013 ReviewsFebruary 22, 2016Does what it is supposed toI can't imagine using an autosiphon without this. If you don't have a brew day assistant, then this will hold the siphon for you. I recently upgraded to a 1/2" auto siphon (which has never worked right, but that is a separate review), and bought this too.April 7, 2014Helps but would be better if strongerIt helps position the auto-siphon and keep it from sliding down, but by itself can't hold it in place. You still need to hold it with your hand.February 17, 2014Needs to be strongerThe clamp helps a little, but it would be a lot better if it was a lot stronger. When the beer is flowing the weight of the tubing tugs it to one side and it comes off the bucket. For better bottles and carboys its better, add another star.November 14, 2013WimpyIt doesn't hold onto a bucket because the tubing pulls it to the side, then it comes off. It has marginal value in positioning the tub, but you still need your hand to hold it in place.September 30, 2013OK - Used for alternate purposeUsed to secure mash recirc line to pot to prevent sliding back out of the top of the pot. Worked decently well for not being designed for that purpose - did not always hold silicone tubing when temperatures reached proper mashing range.September 24, 2013Must HaveThis is a must have if you have the matching Auto Siphon. I struggled without this at first. Then I got wise, ordered one and have never looked back. Clip it on and forget about it. A cheap price to pay for stability of your tube.April 12, 2013Okay for the Ale PailWorks great on my glass carboys but not so hot on the ale pail. Definately worth it for the carboy though so you don't upset the yeast and trub on the bottom.March 27, 2013Does not hold the auto siphon on bucketsWhen I rack from a bucket, the tube pulls the auto siphon to the side, and then the clip detaches. It doesn't have enough strength to secure the auto siphon to the bucket. I have to hold it with my hand, so it's benefit is minimal.March 24, 2013Should be standard for auto-siphonIn my opinion, this is a must-have for your auto-siphon. This lets you take your hands off the siphon so you can do other prep or cleaning. It also functions to set the depth your siphon goes into your bucket/carboy, so if you have a lot of sediment at the bottom, you won't siphon that up.February 22, 2013
- Customer Q&A