DetailsIntroducing the Draft Brewer® Cold Crash™ Keezer Gas Line Kit, an essential package for any brewer who wants the ultimate kegerator or keezer. Whether you’re expanding your existing kegerator or building a keezer from scratch, this kit includes everything needed to distribute CO2 to multiple ball-lock kegs from one regulator. No senseless extra components.
Simply choose how many CO2 ports you need; 2, 3, 4, or 6. The jumper tubing will connect the manifold to any CO2 regulator with a ¼ MFL connection. Individual CO2 lines then connect each port of the manifold to your ball-lock kegs. Or leave one CO2 port open for your Last Straw® draft bottle filler. The possibilities are endless.
The Cold Crash™ Keezer Gas Line Kit is the easiest way to expand any of our Draft Brewer® Keg Systems. Then add faucets using our Cold Crash™ Keezer Faucet Kit and your ultimate kegerator build will be ready.
- Your choice of 2, 3, 4, or 6 way CO2 Distribution Manifold
- Ball-lock CO2 lines (one for each port on your chosen Manifold)
- Gas Line Jumper with ¼ MFL connections
- Flared Nylon Washers
A CO2 Regulator and Gas Cylinder NOT included, but required.
Proposition 65 Warning for California Consumers: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
- Details & Instructions
5.0 / 5.07 ReviewsWorks awesome!Works great in my keezer. A word of advice, I went with the 3 tap but my setup will hold 4 kegs. Go with one more tap than you think you might need.March 9, 2019Purchased
3 months agoPerfect for lodo transfersI wanted to make the gas side of lodo beer transfers from a Speidel fermenter to a corney keg easier. The only things I needed outside this kit was a mfl co2 regulator check valve and a gas keg post for the top of my fermenter. The 2-pass manifold allows me to pressurize the Speidiel and purge a keg of o2. Everything works great! MFL connections make it a clean setup!January 28, 2019Purchased
4 months agoJanuary 17, 2019Purchased
5 months agoNovember 18, 2018Purchased
7 months agoHIGH side linesQuality lines, tap, and manifold! I call the gas side the HIGH side and these materials are great!October 22, 2018Purchased
7 months agoQulaity hardwareDraft Brewer doesn't mess around. Nice pice to expand the system. Goodbye 2 taps hello 4!!March 4, 2017Purchased
over 2 years agoI like the kit.The kit was easy to put together and what is especially important, there were no leaks. By having the connections screw on fittings, changes to other types of kegs are easier. One can have other lines with a hose connection for a sankey keg or for a pin lock keg.February 27, 2017Purchased
over 2 years ago
- Customer Q&A
Browse 6 questions Browse 6 questions and 6 answersCan I get this with pin locks instead of ball lock?Do these shut offs come with check valves?Do I need to use teflon tape between manifold block and valves ?BEST ANSWER: The threads on the 1/4 turn ball valves are tapered pipe threads and yes they should have teflon tape on them to screw into the manifold. The connector on the line that attaches to the ball valve does not require any tape or sealant. Hope this helps!How long is the line provided that connects the CO2 to the distribution block?BEST ANSWER: Measures at 30 in. maybe a little more. Mine is installed so it is a little difficult to measure. If you need longer you can always add onto it.Can this kit be used with nitrogen?BEST ANSWER: There is no reason that one could not use nitrogen with this kit as nitrogen is inert and won't hurt the lines or fittings and pressures are comparable. Most use a different tapper however.How long are the gas lines?