The Steelhead 2.0® Brew Pump with Mounting Bracket

  • The Steelhead 2.0™ Brew Pump with Mounting Bracket
The Steelhead 2.0™ Brew Pump with Mounting Bracket The Steelhead 2.0®  Brew Pump with Mounting Bracket The Steelhead 2.0® Brew Pump The Steelhead 2.0® Brew Pump The Steelhead 2.0® Brew Pump with Power Adapter The Steelhead 2.0® Brew Pump Power Adapter (included) The Steelhead 2.0® Mounting Bracket The Steelhead 2.0® Mounting Bracket The Steelhead 2.0® Mounted The Steelhead 2.0® Mounted The Steelhead 2.0® Brew Pump with Transfer Quick

The Steelhead 2.0® Brew Pump with Mounting Bracket

SKU 41911

PRICE AS CONFIGURED:

$151.99

Product Details

A new kind of brew pump, Steelhead 2.0® has been completely redesigned for brewing. Features:
  • Stainless steel head
  • Maintenance-Free Brushless Motor
  • 24V DC power supply
  • Quiet Operation
  • Handles Liquid Up to 250°F
  • 7 GPM (27 l/min) with a 5m maximum head
  • Weighs only 1.9 lbs.
  • 1/2” NPT Inlet and Outlet
  • Custom Durable rubber mounting bracket
  • Mounting Bracket features (2) ¼” holes spaced 4" apart allowing you to customize mounting to your brew stand or area
Connect it all with the Transfer Quick Pump Connector Kit
A new kind of brew pump, Steelhead 2.0® has been completely redesigned for brewing. Featuring a no-maintenance brushless motor, Steelhead 2.0® runs on 24V DC, eliminating the risk of AC current near your brew house. Not only is Steelhead 2.0® a safer pump, the motor is virtually silent. Small and lightweight, the pump body takes up less space and can be disconnected from the power supply at any time. The all stainless steel pump head features standard ½ NPT ports and a magnetic impeller allowing the use of a valve for flow control. Now including a Mounting bracket to mount your pump like a pro! Like other brew pumps, the Steelhead 2.0® is not self-priming. For best results, position the pump below the level of your kettle and allow the pump head to fill with liquid before turning on the pump. The included mounting bracket allows you to cleanup your brew area and fix the pump where it best fits you. Featuring (2) ¼” holes spaced 4" it'll be hard pressed to find a spot you can't mount this pump! Adding a 1/2" ball-valve to the output of the pump allows you to precisely control the flow of liquid from vessel to vessel or through a plate chiller. You can even stop the flow entirely using the valve, without turning off the pump and losing the prime! A set of Quick Disconnects on your equipment and tubing make the brew day even easier. Don't break your back or the bank, let the Steelhead 2.0® do the hard work on brew day. No more moving large kettles full of near-boiling wort to be chilled or transferred. Features:
  • Stainless steel head
  • Maintenance-Free Brushless Motor
  • 24V DC power supply
  • Quiet Operation
  • Handles Liquid Up to 250°F
  • 7 GPM (27 l/min) with a 5m maximum head
  • Weighs only 1.9 lbs.
  • 1/2” NPT Inlet and Outlet
  • Custom Durable rubber mounting bracket
  • Mounting Bracket features (2) ¼” holes spaced 4" apart allowing you to customize mounting to your brew stand or area
Proposition 65 Warning for California Consumers: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Additional Information

SKU 41911

Customer Reviews

Based on 7 reviews
14%
(1)
71%
(5)
14%
(1)
0%
(0)
0%
(0)
B
B.L.
Whisper mode.

Super quiet and seems to move the liquid well. Time will tell how it holds up. Only drawback is that it does not mount on the same footprint of the most popular brands like chuggar or March.

B
B.C.
No mounting bracket

The pump arrived without the mounting bracket so I was forced to build a mount.

W
W.O.
Decent pump, would recommend to most brewers...

Great little pump. Decent cord length. Small design. Very quiet.
First brew day use was a nightmare. Pump was air locked and woulldn't prime. Lost my temps while messing with the pump. Learned that best position for the pump is inlet straight up (it's not enough to just have pump below gravity line). Now it works very well for HERMS, Vorlauf, Sparge, and transfers.

My only disappointments are:
1) Not enough power to Whirlpool a 1/2BBL kettle. It circulates, but lazily.
2) No mounting ears or tabs.

I've seen other reviews mention the lack of power switch, but magnetic drives are designed to run continuous and control / stop flow with valves.

D
D.M.
Works great for me!

I brew 5 gallon batches with two 8 gallon pots (brew kettle and hot liquor pot) and an 8 gallon mash tun. This pump and the separate hose and fittings kit works well for me. It saves me a lot of lifting on hot pots.

K
K.M.
Simple to use with some additions.

After adding QD and valves, an electrical cutoff and a mounting solution, this is a very capable, quiet pump in my brew setup.