Cleaning and Sanitizing are truths in homebrewing and winemaking you simply cannot ignore. The FastWasher Rack allows you to focus on what matters to you the most — the brewing. The FastWasher Rack is durable, easy to use, and versatile for just about any fermenter you can throw at it. You’ll be wishing you had one for not only cleaning but for rinsing and sanitizing as well.
If you have used FastWasher 12 or 24 you are going to love the new FastWasher Rack. Once again the creators of the FastWasher family are bringing you another Get Out of Chores Free card. Engineered from dishwasher safe high-density plastic, it’s easy to assemble in minutes no tools needs.
Even more simple to use, place the FastWasher Rack in a sink or bin filled with cleaning solution, invert the fermenter or keg onto the FastWasher Rack and let the powerful pump do the rest. Use your FastWasher 12 anywhere with the highly recommended Cleaning & Sanitizing Tote (not included). No scrubbing. No nonsense. Just extra time to start your next batch or enjoy the last.
Clean and sanitize almost every type of fermenter from 1 gallon to 14 gallons. From glass to plastic and even stainless steel, if it fits on the FastWasher Rack it will clean it.
Place the FastWasher Rack with pump in the Cleaning & Sanitizing Tote or similar bin/sink. Fill tote or sink with your preferred cleaner solution, we recommend PBW. Lower inverted fermenter or keg over the center post so it rests on the FastWasher Rack, or Carboy adaptor if using. Plug in the pump and let the FastWasher Rack do the rest.
Note: Make sure to have a fermenter/keg on the FastWasher Rack before plugging in the unit, it will start to pump cleaner right away.
- 530 Gallon per hour CE/UL pump
- Fast Washer Rack w/ 4 legs
- Carboy Adaptor
- 12" Center Post with coupler and "T"
- 3 barbed hose attachments
- Size w/ barbed attachment: 10.5" wide x 15.5" long x 18" tall
- Rack with just legs size: 10.5" wide x 15.5" long x 4.7" tall
Customer ReviewsWrite a review
I haven’t used it yet but all of the parts are there and it looks fairly simple to assemble and use.
My testing revealed that, without any attachments on the pump, I was able to put up a column of water of about 8 inches (measured from the top of the pump housing). With just the (included) 12” PVC pipe installed, it was about 8” above the pipe. With the PVC and the (again included) ¼” barb fitting installed, I got a column that reached 2 feet above the fitting - for a total of 3 feet above the level of the pump housing. With the attachment that allows for rinsing the output tube while also rinsing the interior of a keg, I got a column of about 1-½ feet above the upward facing fitting.
My conclusion is that the pump has adequate output to thoroughly rinse the interior of any container that is no more than 2-½ feet tall. This is, of course, under ideal circumstances (everything is brand new).
I found out that, when rinsing my 1 gallon fermenter, the neck isn’t big enough to allow enough water to flow out before the incoming water is overwhelmed and, after about 10 seconds, I need to stop the pump to allow it to drain out before continuing to rinse.
Also, using an inline foot switch to operate the pump (I bought mine on Amazon) is worlds better (and somewhat safer) than struggling with the plug to turn it on and off while trying to stabilize whatever I’m rinsing.