Introducing the easiest way to serve draft beer, ever! The Draft Brewer® Snap Tap ™ is the most portable and party-ready way to share beer on tap.
Ready-out-of-the-box, the Snap Tap™ is a top-grade stainless beer faucet that pops right on your ball lock keg to instantly get the brew flowing. This tidy little tool is ultra-portable, using minimal space and eliminating the hassle of tangled tubing.
Keep serving simple and keep the party going with the compact, easy-to-use Draft Brewer® Snap Tap™.
With fast, easy set-up, this party-ready tap makes sharing easier than ever. You don’t have to fiddle with tubing, figuring out where to wrap it to keep it off the ground. Better yet, your beer won’t get warm sitting in draft lines. With the Snap Tap™, brew stays in the keg until the moment you pour a cold one.
Quick and easy-to-clean, just give the tubing-free Snap Tap™ a quick rinse with water and you’re good to go! No more draft lines filled with old beer. Plus, the parts easily disassemble by hand for when you want to give it a deep clean.
The Snap Tap™ is easier for guests, too. Just pull the tap handle forward and beer comes out. Keep serving simple and keep the party going with the compact, easy-to-use Draft Brewer® Snap Tap™.
Note: when serving from the Snap Tap™, keep beer cold & serving pressure to a minimum to prevent foaming.
- Details & Instructions
4.3 / 5.04 ReviewsGreat for taking the keg on the roadI have had no issues with this product and have used it on more than 10 kegs, it's very handy when you're taking your beer to a party or tailgate.March 3, 2016Make sure it's tightened first!Make sure it's tightened first!March 10, 2016snap tapWorks GREAT don't have to deal with cheap plastic tap anymore, it kept falling apart. This Snap Tap is the REAL DEAL .... LOVE IT......July 31, 2016draft brewer snap cock faucetThis isn't a good product, don't buy it. The faucet leaks beer and co2 when you aren't pouring and must be disconneted between pours, or you lose a lot of beer and makes a big mess.September 22, 2015
- Customer Q&A
Browse 4 questions Browse 4 questions and 4 answersHow tall is this tap? I am limited in vertical space in the fridge.BEST ANSWER: It's roughly 5 .25 inches from Cornelius keg to the tap handle screw. About 7 inches if you leave the black tap handle attached.I have pin lock corny kegs. Can I buy a pin lock tap and use it with this faucet?BEST ANSWER: Yes, you would want the threaded pin lock liquid fitting.Does this tap result in overly foamy pours? Normally you need around 4ft of tubing between the keg and tap to keep the pours from foaming up too much at normal pressures.BEST ANSWER: I does not. To avoid foamy pours, make sure your brew is well chilled and use a lower serving pressure around 5 psi.will this fit on a cannonball mini? Can I change out the tap handle if I wanted to?