DetailsThis Mash Tun False Bottom Adapter Stainless version comes with everything you need to attach your domed false bottom to the back of your BrewLogic bulkhead or spigot. You get a stainless 1/2" MPT to 3/8" barb piece, plenty of 3/8" tubing to make the connection, and 2 stainless steel clamps to hold everything in place.
- Details & Instructions
4.9 / 5.012 ReviewsworksThis simple little attachment works well enough. I use it to connect the false bottom to the ball valve in a rubbermaid cooler. Good quality stainless steel, simple instillation with the option for easy removal and cleaning. Rarely ever get a stuck sparge. Effective.December 5, 2012Does the jobWhat can I say, it works as it is meant to. Great and simple connector.January 16, 2013Fits and worksThis works perfectly for connecting the false bottom to the ball valve. It was easy to install and will last. Plus it's easy to remove for cleaning. Overall very good.May 23, 2013it does the jobIts fits my 5 gallon Igloo mash tun with the 9" false bottom. Everything works smoothly.September 1, 2013Great product when complete.I ordered 2. One only came with 1 SS hose clamp. One call to Midwest and they sent out 2. They must have sent out the replacement clamps with 3 day air because they made it to CA 2 days after we called. Great customer service!!!September 24, 2013Good for a 5 gallon coolerConnects my false bottom to my ball valve. Its easy to install and remove for cleaning. It should last.October 30, 2013Mash Tun False Bottom Adaptor, Stainless Reviewthis adapter was very easy to use. it easily fit into my 10 gallon igloo cooler. Highly recommend. One suggestion I will offer is clamp the threaded end of the adaptor. This is beneficial because it is awkward to secure the clamps after installation in the bottom of your mash tun.January 2, 2014EffectiveIt's pretty simple and works and it's stainless steel. It connects my ball valve to the false bottom without falling off.February 9, 2014Great BuyFor the price you can't beat this false bottom. Only issue is it get a little high centered if you are using a cooler since the cooler itself has a little peak in the middle.January 12, 2016Excellent AdapterWorked well with my 5 Gallon Rubbermaid cooler 9" false bottom, and Stainless Steel Cooler Valve. Made the connection simple and all stainless.May 6, 2012
- Customer Q&A
Browse 2 questions Browse 2 questions and 2 answersThe hose looks like Nylobrade. That hose is rated at 140 degrees. On their website, max temp is 175. I am assuming those temps consider the hose under pressure. If I use this hose to transfer wort from the mash tun to the bottom of the boil kettle, with no internal pressure, will the hose survive in the boil for an hour or so?BEST ANSWER: The hose is intended for mashing purposes only and is not designed for use in a kettle during boiling. Because of this, we cannot guarantee that the tubing will survive these hotter temperatures.How long is it and what is the maximum temperature rating of the hose?BEST ANSWER: That is made with the clear high-temp tubing now, it's good for 212 degrees. It will be about 7 inches long. -Mike W, Midwest Supplies