Call Us 888-449-2739

Text Us 240-575-2848

Monster Mill MM3 Triple Roller Mill Kit

More Views

Monster Mill MM3 Triple Roller Mill Kit

SKU: 40914

$299.99
OR
Description

Details

This is the mill if you're brewing large batches, or want to maximize mash efficiency at any volume. Heavy-duty triple-roller homebrew mill is designed for motorization (can be powered with a corded electric drill) and features an average throughput of 8 lbs./minute and adjustable gap spacing for fine-tuning your crush.

Why three rollers? The MM-3 crushes all your grain twice, with one pass through the mill. It starts with a preliminary crush through the initial fixed gap between the top two rollers, and then ends with a pass through the second gap between the drive roller, and the bottom third roller. The initial pass slightly flattens the grain, and gets it ready for the next crush, that breaks apart the grains and loosens the starch with minimal husk damage.

Includes roller assembly, base, and steel hopper with 11 lb. capacity - just add a corded electric drill or a 3/8" crank handle for the ultimate pre-mash gristing experience.


Roller Assembly:
6061 aluminum block frame with three 6" long x 1.5" dia. knurled steel rollers riding on SAE 841 oil- impregnated bronze bushings
.060"fixed primary gap, 0-0.065" fully-adjustable secondary gap
dual eccentric gap spacing adjusters, built from stainless steel to prevent galling
3/8" integral drive shaft w/3 flats for drill driving, 2" long outside frame
3/8" integral axles
average throughput 8 lbs/min.

Hopper:
heavy duty galvanized steel
9" overall height
11.5" x 12.75" at the top
11 lb. capacity

Base:
approx. 12 x 12" to fit over standard 5 or 6 gallon buckets
radiused top edges and corners
hand-routed grist window

*Does not include pictured crank. Just add a corded electric drill or a 3/8" crank handle for the ultimate pre-mash gristing experience.
Details & Instructions

Additional Information


Reviews
4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
It delivers what is promised
This is sure a fine Mill. Very easy to adjust and it does its job. Only cons is that some times there is a grain so hard that you need to roll in the oposite direction in order to start crushing the grains. But this I saw happening in every single Mill I?��ve seen so far. It is just a matter of the grains propper fitting into the rollers.
August 3, 2016
Customer Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
I want to purchase this as a means to crimp oats for my horses....your thoughts?
S H on Feb 24, 2016
BEST ANSWER: This mill is intended to crush grain wholly, and is not intended to leave grain partially milled. This may make it inappropriate for use as a feed crimper.
can you guys get the MM3 pro with the hopper and extension?
B E on Jun 6, 2016
BEST ANSWER: We are not set up to sell that item and it is quite extensive to offer a new product. Monster hardware can sell you that directly. Cheers!

Please wait...

Your selected product has been added to your Cart.

Continue Shopping Go To Cart