Barley Crusher Malt Mill

  • Barley Crusher Malt Mill hopper attached to the base

Barley Crusher Malt Mill

SKU 40134

PRICE AS CONFIGURED:

$189.99

Product Details

A high quality, precision-machined mill that is easy to set up and use. A consistent, precise crush is vital for making the best beer possible, and The Barley Crusher delivers.

This grain mill comes with a lifetime warranty from the manufacturer and some of the best features on the market:

  • Solid base fits easily on a standard 6.5-gallon fermenting bucket.
  • Adjustable rollers with a .015 to .070 range.
  • 5-inch rollers have a 12 TPI knurl that pulls grain through while leaving the hull intact to form an excellent filter bed for sparging.
  • Your choice of hopper holds approximately 7 or 15 pounds of grain.
  • Includes a hand-crank but no adapters are needed to use a 3/8 drill motor; using a 3/8 drill motor at 500 RPM gives a throughput of approximately 6 pounds a minute.

Additional Information

SKU

40133, 40134

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
J
Joseph D.
Grain crusher performance

This is the second one I purchased…I have two locations where I brew. These work very well. Pull it out of the box, put it on top of a plastic bucket, fill the hopper with grain, attach your cordless drill and pull the trigger…the job is done. If your looking for one that is reliable and always works, this is a good one.

C
Clark H.
Worked well to start…

The barley crusher worked well for the first 4-5 uses, however the o-ring snapped only allowing 1 roller to move. After doing some research I found I was not the only one with this issue. After getting a new o-ring, taking apart the grain mill, installing the new o-ring, the mill work well again. I’ve used it 3 more time since and it has been fine. Time will tell….

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
J
Joseph D.
Grain crusher performance

This is the second one I purchased…I have two locations where I brew. These work very well. Pull it out of the box, put it on top of a plastic bucket, fill the hopper with grain, attach your cordless drill and pull the trigger…the job is done. If your looking for one that is reliable and always works, this is a good one.

C
Clark H.
Worked well to start…

The barley crusher worked well for the first 4-5 uses, however the o-ring snapped only allowing 1 roller to move. After doing some research I found I was not the only one with this issue. After getting a new o-ring, taking apart the grain mill, installing the new o-ring, the mill work well again. I’ve used it 3 more time since and it has been fine. Time will tell….