DetailsThis acid based, non-foaming final rinse* is used by many brewers who prefer the non-foaming action for their fermenters, serving tanks, part soaking and more.
Great on draft lines for eliminating residual odors or flavors which can find their way into the product being dispensed.
Use as a final rinse after thoroughly cleaning with a good alkaline cleaner such as PBW. Use Saniclean at a rate of 1 oz. per 3 gallons of water. Apply by spray or soak with a contact time of at least 3 minutes.
Effective for 1 week after mixing with water. This product is not recommended to use on soft metals, like Aluminum.
This product is only eligible for ground shipment within the contiguous United States.
*Note: Not a sanitizer or cleaner
- Details & Instructions
5.0 / 5.022 ReviewsGreat stuffGreat stuff I like no foam and its cheaper than starsanDecember 14, 2018Purchased
4 months agoI like the saniclean product due to the fact doesn't need any
more then to let bottles dry on the bottle tree, does not change the flavor of the beer.December 3, 2018Purchased
over 2 years agoNovember 10, 2018Purchased
5 months agoThanks !Saniclean works great as usual, but the service from Midwest is the best !!June 9, 2018Purchased
10 months agoI have not yet tried this productThe product arrived as expected. I have yet to actually use this as I make batches of cleaners and sanitizers when I Bottle and begin new brew sessions. I have been using other products from this manufacturer and have always been pleased by the results. I use these brewing products for brewing and for cleaning other items in my kitchen. I will likely use this product to remove odors from the seal of an electric pressure cooker before using in the brewing process as I tend to use the pressure cooker to cook some very aromatic dishes that normal cleaning fails to fully remove the odors from the seal. This will be an important test to determine just how effective this product is at removing odors from spices used in cooking.February 4, 2018Purchased
1 year ago5 Star SanicleanThis product has made sure we will have a safe environment for our wine! We leave it in contact for about 5 minutes and then rinse with vinegar water. All has been well since using this product!March 18, 2017Purchased
over 2 years agoMy preferenceThis is my go to sanitizer. I prefer it for its low foaming nature. I also like the easy measure design of the bottle.February 7, 2017Purchased
over 2 years agoSanitizes in 2 minutesI keep a jug filled with solution. If I need to sanitize a bucket or carboy I use a funnel to pour it in, shake it up, and pour it back. By the time I'm done it's sanitized. And there is no foam to get everywhere.February 10, 2014Good sanitizer without the foamThe foam in Star San is kind of annoying and I'm very happy with this sanitzier. I use it for all my buckets and bottles, and have never had a problem.December 29, 2013Works well without the foamI consider the foam of StarSan to be annoying and am more than happy to use this. I sanitize my fermentors and bottles with it right before using. No foam needed.December 28, 2013
- Customer Q&A
Browse 4 questions Browse 4 questions and 15 answersDo u need to rinse after using saniclean?BEST ANSWER: This commercial product notes in the instructions that some locals/states require a rinse after its use. A reason was not given. We do rinse with 1C of white vinegar to a gallon. Rinse gently with a gentle L to R, not up down, type motion to minimize foam creation. Drain.Do u need to rinse after use of saniclean?BEST ANSWER: The label says no, but I do because if saniclean comes in contact with any of the sulfites, is creates noxious fumesI use iodophor most of the time. I got the marks keg washer and wanted to know about the saniclean... Does it lose color and therefore effectiveness the same way that iophofor does when being pumped through something like the marks keg washer? Looking for a better option than San star as the foam and film after drying bothers me!BEST ANSWER: Hello Pat,
Thank you for choosing Midwest Supplies! There is no color change, but it should last approximately 1 week after being mixed up. The best and pretty much only way to test its potency would be to test the pH of the solution. As long as it is a pH of 3 or below, it will still do its job! I hope that this helps!So is this to be used just like starsan? This product just produces little to no suds? Thank-you in advance for any reply.BEST ANSWER: Correct. Saniclean does not have the foaming agent that is added to Star San. This makes it better for cleaning when a pump is involved.