DetailsFor use with any of our 1/4" flare fittings. The Swivel Nut Gasket is great to use on gas threaded fittings to provide a more reliable seal.
- Details & Instructions
5.0 / 5.013 ReviewsA must haveuse theses little suckers and worries about leaks are gone.July 1, 2012Leak StoppersThese are a must have. Do yourself a favor and buy 20 or more because you'll always need one. Since I've started using these in my keg system I've had less leaks to worry about.December 4, 2012get a lot of theseThese work great to help stop leaks. Always still double check, but these are great._x000D__x000D_Buy a ton of these.December 13, 2012No more leaksThese really do stop leaks. Since I've started using these in my keg system I've had less leaks to worry about.February 18, 2013Great valueThese are a must have. I havent had any leaks since installing these :)March 22, 2013I use a lot of themI use a handful of these and no longer worry about diagnosing leaks and using Teflon tape. I use them for all my MFL connections, just tighten them snugly.July 12, 2013Essential for 1/4" MFL fittingsTheys work great if you have threaded metal flare connections and want to avoid leaks. I just wish they were a hair big so they'd stay in place easier when moving lines around different connectors. Overall, highly recommended and cheapJuly 27, 2013Stop leaksI use them in every one of my MFL connections and don't have any leaks. They have to be tightened snugly, but not over tightened.August 12, 2013They helpI bough a few bucks worth and haven't had leaks since then. Diagnosing leaks and connections is a pain that I never want to experience again either.September 23, 2013Perfect!Low cost, very low cost - and can save you a ton of money from wasted co2 or nitrogen. They are however a little tricky to put on and line everything up.September 28, 2013
- Customer Q&A