11.5" Titan® Universal False Bottom

  • 11 and a half inch diameter Fermenter's Favorites Titan False Bottom
11 and a half inch diameter Fermenter's Favorites Titan False Bottom Titan False Bottom Detail The two-piece proprietary Titan™ pickup tube Titan Barbed Elbow Fitting

11.5" Titan® Universal False Bottom

SKU 41229

PRICE AS CONFIGURED:

$42.99

Product Details

The strongest, most effective false bottom on the planet—introducing the Titan® Universal False Bottom for better beer, no matter how you brew it. Titan delivers high efficiency, clarity and a solid grain bed whether you mash in a MegaPot 1.2, a cooler or a keggle.

A false bottom acts as a strainer, preventing grain particles from draining into the boil kettle with wort. An essential piece of all-grain equipment, we've built the Titan™ to be stronger and more effective than any other false bottom.

Our brewmasters have thrown every worst-case brewing situation at the Titan™. It has never clogged and never collapsed. The two-piece proprietary Titan™ pickup tube supports the dome to withstand whatever pressure your biggest brew day can muster.

The Titan pickup tube gets closer to the floor of your mash tun than any other false bottom. You'll be able to transfer more of your wort into the boil kettle, leaving less than ¼" behind in what is called the "dead space".

With its chrome-like sheen and smooth edges, it's a beautiful piece of all-grain equipment that keeps the rest of your equipment beautiful, too. No scratched brewing vessels or clogged ball valves. Just a smooth flow, clear wort and an effective, stress-free brew day.

Required but not included: a 3/8 barb for the inside of your kettle or cooler and a short length of high-temp tubing to connect the barb to the elbow on the false bottom. Worm clamps can also help secure this connection.

Customer Reviews

Based on 11 reviews
55%
(6)
27%
(3)
9%
(1)
0%
(0)
9%
(1)
S
Sean O.
Doesn't sit flat in igloo cooler once plastic deforms with heat

This false bottom seems quite well made, but I would only recommend it for a kettle or ss mash tun with a perfectly flat bottom. Because the intake fitting under the dome is designed to sit as close as possible to the bottom, if the bottom of the mash tun is at all uneven (as igloo coolers are after the heat of a couple brews) then the false bottom sits on tge intake fitting and rocks, leaving one side of the false bottom lifted, which lets lots of grain under which clogs the intake fitting.

I've gone back to my bazooka screen after 3 brews that took over an hour until it would run without getting stuck. I may try to find an alternative intake fitting that doesn't extend so low, but for now I'm just writing it off as an L.

D
David M.
Worked

Solid bit of equipment; no defects I could detect without x-ray and so forth.

H
HomeCook'd
Great bottom, no sharp edges!

Used this in the 10 gallon igloo cooler as my MLT. Sits tight, no stuck sparges, easy to clean after. Edges are trimmed so no pokeys to scratch the plastic.

S
Snow
Seriously made a big difference

It was great no clogging easy to slide in. The curved lip won’t scrape your coolers. Also easy to clean. Great product!

D
Dave V.
You will need tubing and a nipple did not come with it

Nice product works well

Customer Reviews

Based on 11 reviews
55%
(6)
27%
(3)
9%
(1)
0%
(0)
9%
(1)
S
Sean O.
Doesn't sit flat in igloo cooler once plastic deforms with heat

This false bottom seems quite well made, but I would only recommend it for a kettle or ss mash tun with a perfectly flat bottom. Because the intake fitting under the dome is designed to sit as close as possible to the bottom, if the bottom of the mash tun is at all uneven (as igloo coolers are after the heat of a couple brews) then the false bottom sits on tge intake fitting and rocks, leaving one side of the false bottom lifted, which lets lots of grain under which clogs the intake fitting.

I've gone back to my bazooka screen after 3 brews that took over an hour until it would run without getting stuck. I may try to find an alternative intake fitting that doesn't extend so low, but for now I'm just writing it off as an L.

D
David M.
Worked

Solid bit of equipment; no defects I could detect without x-ray and so forth.

H
HomeCook'd
Great bottom, no sharp edges!

Used this in the 10 gallon igloo cooler as my MLT. Sits tight, no stuck sparges, easy to clean after. Edges are trimmed so no pokeys to scratch the plastic.

S
Snow
Seriously made a big difference

It was great no clogging easy to slide in. The curved lip won’t scrape your coolers. Also easy to clean. Great product!

D
Dave V.
You will need tubing and a nipple did not come with it

Nice product works well