I have air going into my pump and my wine is foaming.
There are 3 possibilities that your wine may be foaming...
The wine is very young and carbon dioxide (CO2) is present. The pump will release this gas simply due to the action of the pump. Release of CO2 from the wine is a good thing; most kits recommend agitating the wine to help release this gas.
You have removed the port fitting (black connector on the intake of the pump). We recommend that this fitting should not be removed. If you have done so make sure that the O ring has not been crimped and that it is fully inserted into the intake hole of the pump.
The intake hose is vinyl and can expand. Cut approximately 1/2"" to 1"" off the end of the hose and re-insert the hose. This will create a better seal at that point and not allow any air intake.
Midwest Supplies is the largest home brew and wine making supply shop in America and was voted the Twin Cities Best Homebrewing Supplies shop for 2012. Since 1995 we have been providing home brewers and winemakers with quality home brewing and wine making equipment, fresh ingredients, and outstanding customer service. Whether you're new to brewing, a weekend vintner or a master of all things fermented, we've got all the beer and wine making equipment and ingredients you need. Midwest Supplies has more than hundreds of beer recipe kits to brew and over 130 wine ingredient kits to choose from. We are proud of our wide selection and the high quality of the thousands of products we offer. Open 7 days a week, our knowledgeable and super friendly staff of brewers and wine makers are always available to answer your questions about home beer brewing or wine making and help you make the best wine and beer. We offer a 30 day money back guarantee for all products.
Your selected product has been added to your Cart.