DetailsAllows you to connect 3/8" or 1/2" ID tubing to the ball valve. 1/2" NPT threading will fit standard 1/2" fittings like ball-valves and older style bulkheads.
**NOT compatible with IsoFlow or EZ Clean bulkheads. Check your kettle before ordering. Call the Brewmasters at 1.888.449.2739 if you are unsure.
- Details & Instructions
4.8 / 5.04 ReviewsGood quality and priceI have bought a few of these in the past. Use them for my mash tun as well as on my brew kettle. Price is good, quality is superb.February 2, 2014Excellent ProductExcellent product, no fitting problem & flawless shipping and handling.August 13, 2012Outstanding ProductThis is a perfect match for my weld-less valve. High quality of construction and excellent value. The order process and shipping was flawless.August 4, 2012not really a 3/8" barbThe ones I received in Nov 2011 were not really a 3/8" barb. At the tip of the barbs it actually measures a little less then 3/8". Normally, a "3/8 inch barb" actually measures more than 3/8" at the tip. This would ensure a tight fit when using 3/8" ID tubing. The case with these is that if you used 3/8" ID tubing it would be a fairly loose fit, absolutely requiring some sort of clamp to make a seal even at very low pressure._x000D__x000D_The price is excellent, but I advise if you want to connect 3/8" ID tubing, look elsewhere.December 18, 2011
- Customer Q&A