Big Mouth Bubbler® Universal Dual Port Lid

  • Big Mouth Bubbler® Universal Dual Port Lid

Big Mouth Bubbler® Universal Dual Port Lid

SKU 41830

PRICE AS CONFIGURED:

$5.98

-25%

Product Details

The first-ever universal lid for Big Mouth Bubbler® fermentors. Engineered to suit any fermentor in the Big Mouth Bubbler® family.

From EVO 2 and Plastic to first-generation glass and even the Little Big Mouth Bubbler®, ribbed silicone rings ensure a completely air-tight seal. Better yet, the port is perfectly sized for all your standard homebrew tools, from a universal carboy bung and standard blowoff hose to a testing thief and auto-siphon.

Easy to clean, just pop it in the top rack of your dishwasher and run it through a standard cycle. You can also use your standard homebrew cleaners and sanitizers.

Available in single- and dual-port configurations. Dual-port gives you the ability to constantly monitor temperature through one port while allowing CO2 to escape through the second port.

The universal lids all use a:
  • Small universal stopper
  • Standard 6.5 rubber stopper.
  • Additional Information

    SKU 41830

    Customer Reviews

    Based on 9 reviews
    44%
    (4)
    0%
    (0)
    0%
    (0)
    11%
    (1)
    44%
    (4)
    R
    Riley M.
    Big Mouth silicone gasket

    I've been frustrated with the new design too. Lid popped off etc. Tied it down. But not anymore.

    After some use the silicone will grab and hold. Before that the trick I use is DO NOT LET IT GET WET WITH either wort, Star San, or anything that will lubricate it. Clean everything, rinse neck, lid, and gasket with plain water and install. Rinse fermenter through the stopper hole, drain the same way. Don't remove the lid. When filling with wort go through the stopper or, better yet, run your line into the valve. With the airlock on. No chance of air contamination that way.

    After a few uses the gasket will stick but I do the above anyway and have had no problems.

    C
    Customer

    Big Mouth Bubbler® Universal Dual Port Lid

    J
    Julian A.
    Lid

    Excellent for fermentation. It helps to release the air faster

    J
    John P.
    Useless, a total waste of time and money.

    Waste of money, pops out and won't stay seated. I wish I had checked the reviews.

    P
    Paul C.

    Had to tie-rap the lid down during fermentation. Bring back the screw on lid!!!!!!!

    Customer Reviews

    Based on 9 reviews
    44%
    (4)
    0%
    (0)
    0%
    (0)
    11%
    (1)
    44%
    (4)
    R
    Riley M.
    Big Mouth silicone gasket

    I've been frustrated with the new design too. Lid popped off etc. Tied it down. But not anymore.

    After some use the silicone will grab and hold. Before that the trick I use is DO NOT LET IT GET WET WITH either wort, Star San, or anything that will lubricate it. Clean everything, rinse neck, lid, and gasket with plain water and install. Rinse fermenter through the stopper hole, drain the same way. Don't remove the lid. When filling with wort go through the stopper or, better yet, run your line into the valve. With the airlock on. No chance of air contamination that way.

    After a few uses the gasket will stick but I do the above anyway and have had no problems.

    C
    Customer

    Big Mouth Bubbler® Universal Dual Port Lid

    J
    Julian A.
    Lid

    Excellent for fermentation. It helps to release the air faster

    J
    John P.
    Useless, a total waste of time and money.

    Waste of money, pops out and won't stay seated. I wish I had checked the reviews.

    P
    Paul C.

    Had to tie-rap the lid down during fermentation. Bring back the screw on lid!!!!!!!