DetailsIntroducing Draft Brewer®, the first complete taproom in a box. Quick setup, minimal maintenance, and more time than ever to enjoy your craft.
The Draft Brewer® Single Keg System is ready out-of-the-box to get your taproom up and running. Start serving and sharing your brew within just days of receiving your new system.
Switch out brews in an instant or relocate the party on a minute’s notice. Fully-assembled Draft Brewer® tap lines snap right on your keg. Enjoy your brew sooner and carbonate beer with a CO2 tank (not included) in 1-2 days instead of 2-4 weeks.
Best of all, it takes just a swish of sanitizer to prep your Draft Brewer® keg for the next batch. Enjoy extra free time to brew, share and enjoy more with the very first taproom in a box.
Serve your brew from any nook or cranny in your home with swivel-connection tap lines. With a Draft Brewer® system, no brew cave or home pub is too small to enjoy good beer on tap.
Take the guesswork out of perfect carbonation. Adjust the pressure in real-time and guarantee perfect pours. The ultra-durable CO2PO® Dual-Gauge CO2 Regulator makes carbonation easier than ever. Hand-adjustable pressure knobs are twist-and-go. High-contrast gauges give you pressure information in a quick glance. Enjoy ideal carbonation without nightmares of bottle bombs ever again.
Includes everything except a CO2 tank to share and enjoy draft homebrew.
- One Draft Brewer® 5-Gallon Keg
- CO2PO® Dual-Gauge CO2 Regulator - Patent Pending
- Fully assembled gas line & nylon washers to ensure tight seals
- Fully assembled draft line for pouring brew from your keg
- Details & Instructions
4.6 / 5.019 ReviewsA fine keg systemA fine keg system. I currently have a smaller keg (1.75 gallon) for mead & cyser. I purchased this as I've started brewing beer. It works great. I think the seal is better on this than my smaller keg. I received it earlier then expected. I bought it on sale with free shipping & it's working great.January 5, 2018Purchased
1 year agoLeak I cannot findI think that this all in one setup is great and appears to be high quality. I am using it for the first time with my first home brew Hefe. The issue I am experiencing right now is a hiden leak with the CO2. I used this tank with my kegerator setup and had no issues. After hooking it up to this homebrew keg system, I am going through CO2 like no tomorrow. I followed instructions and have checked for leaks in all obvious areas using soapy water. I cannot find a leak but yet I am on my second refill without even going through 3 gallons... any advise out there?December 7, 2017Purchased
1 year agoGreat Service product looks goodReceived this kit as a gift. Somehow the connecting tubes were left out of the kit. One call to Midwest and the tubing was on its way. Great customer service.
New keg and regulator look good and work well.July 6, 2017liquid line too shortgreat keg mine said it was new but i really don't think it was. Their were a lot of scratches but that dost really matter the main problem is the liquid line is only 5'! so if you use it you really need to dial down the serving pressure which means after you pour a pint you need to remember to turn the pressure back up or you will have undercarbontated beer. Do yourself a favor if you buy this and get at least a 10' liquid line.June 4, 2017Purchased
1 year agoWorks and good priceOnly problem I have and its not big deal but the gauges tend to be a bit sticky or maybe its the regulator not giving a nice even pressure but it does work.May 13, 2017Purchased
1 year agoSatisfiedAwesome product delivery was quick plan on ordering a few moreMay 8, 2017Purchased
1 year agoDraft BrewerEverything you need to keg beer and at a decent price.May 5, 2017Purchased
1 year agoEasy to hook up. Works great. Much more convenient than bottling.April 21, 2017Purchased
1 year agoGreat for anyone looking to get into kegging!Works great, looks great! Really easy to follow instructions. Regulator works great and looks really good!April 19, 2017Purchased
1 year agoLove this new keg !!!!This is the first keg system that I have purchased and so far it is working great . It sure beats bottling for sure ??April 11, 2017Purchased
1 year ago
- Customer Q&A
Browse 9 questions Browse 9 questions and 30 answersWhat is the height of the keg? Trying to figure out the size of a mini-fridge that I'll need.BEST ANSWER: 26" with the fittings in place. I have a small regular fridge with the shelves taken out.what cools the keg?BEST ANSWER: You’ll need to put your keg in a refrigerator or a chest freezer with a temperature controller to chill your keg.Ball or pin lock?BEST ANSWER: The Draft Brewer system I have and use is a ball lock. I have found kegging 5 gallon batched of home brew to be far better than bottling, and this system is easy to use out of the box as a relative novice.What size CO2 bottle will I need to have to make this work correctly?BEST ANSWER: most brew supply places have the bottle already filled with food grade Co2. I think it is 10 pounds.small size. Important to get food grade.Does this system have a one way valve on the gas line to prevent liquid from flowing into regulator ?BEST ANSWER: The liquid cannot flow as long as there is positive pressure from the CO2 tank. Most of the liquid is below the opening of the valve anyway.Will this system work with other commercial kegs too?BEST ANSWER: Only if you get a conversion kit for ball lock to sankieWhat is the diameter of this keg? I want to see if it will fit in my refrigerator that is only about 10" deep on the inside.BEST ANSWER: Approx. 9". It should fit as long as the door shelves don't extend into the 10" space.Sorry if this seems random, but what is the diameter (NPT size) where the posts screw on?BEST ANSWER: They are both different on these kegs, so the posts cannot be put in the wrong position. The gas post has threading of 19/32", and the liquid post threading will be 9/16". The replacement for the gas post would be K107, and the replacement for the liquid post would be K106.What is the diameter of the liquid line?