DetailsThe last word in drinking ice-cold draft homebrew on-the-go, this dual-tap draft box chills your beer as it passes through the cooler for a perfect pour no matter the outside temperature. Our efficient 48-quart high-impact chest with dense foam insulation is equipped with a two-circuit aluminum cold plate to for rapid cooling into a surrounding ice water bath. Embedded inside the massive aluminum cold plate is 18 feet of stainless steel ¼” I.D. tubing for ease of cleaning,
Includes cooler outfitted with two faucets, two-circuit cold plate and fittings. Required but not included: gas system, couplers or disconnects to fit your kegs, connections for two beer shanks, ice and of course, kegs full of homebrew ready to be chilled to perfection. The included beer shanks will require tailpieces, beer shank nuts and neoprene washers.
Cooler measurements: height 13” x length 24” x width 15”
- Details & Instructions
5.0 / 5.01 ReviewBest way to serve 5 gallon kegs of beerThis is what I have needed to make it so easy to serve the 5 gallon keg of beer. You can serve the amount you want and not have to chill the whole keg like I have been doing. So you can serve and save the rest for later.January 24, 2016
- Customer Q&A
Browse 2 questions Browse 2 questions and 2 answersIs the embedded tube 18' long for each tap, or is there only 18' of tube total (9' per tap)?BEST ANSWER: It is 18' for each of the taps, to provide enough cooling, and the proper pouring resistance as well. - Mike W, Midwest SuppliesWhat are the dimensions of the beer shanks? Do you sell the correct tailpiece washer and nut to accommodate the shanks?BEST ANSWER: Hello Bill,
Thank you for choosing Midwest Supplies! The beer shanks on the Jockey Box are the 3 inch shank which is 1" in diameter, and the bore is 3/16". We do sell the nut and washer for the tail piece. I hope that this helps! Let us know if you have any further questions!