DetailsThe Low Profile US Sanke coupler is perfect for those trying to fit an American keg in a tight refrigerator. The coupling will only stick up about 1.5" from the top of the keg. Because the line fittings are both on the side of the coupler, you don't have to worry about kinked tubing that may occur on a standard coupler. The coupler comes with a 5/16" barb to attach your gas tubing, and 1/4" barb to attach your liquid tubing.
- Details & Instructions
5.0 / 5.02 ReviewsQuality product, fit my needs wellUsed this for 1/6 barrels in my kegerator. It's as easy as any other sanke tap, the only downside to me is that the input and outlet are in a straight line which could make it difficult to route lines depending on space.March 5, 2013Great in tight spaces & EZ to clean!I couldn't fit a standard sanke tap in my keg fridge on standard 1/2 barrels and pony kegs. I converted a standard top-freezer refrigerator and was surprised at how tight the space ended up. I cleared out all shelving except the bottom to give the kegs an even platform to stand on. If you are converting the same style fridge then you'll have to use one of these to clear the top of the fridge. I also own standard sanke taps for my shorter kegs and found this style easier to clean. I also installed "pigtail" tubing on the in / out fittings with beer thread couplings so that it is interchangeable with my home brew kegging system.December 22, 2012
- Customer Q&A