DetailsThe Pin Lock Gas Line Assembly includes a pin lock gas/in quick disconnect, 3 feet of 1/4" tubing, and two hose clamps and barb swivel nuts. Simply thread the open end to the gas-out of your regulator or CO2 manifold, hook up the pin lock fitting to your pin lock keg, and you're ready to turn up the pressure on those kegs.
- Details & Instructions
4.5 / 5.017 Reviewsused kegthe keg is bent at fill port.it will not seal on its own, you can not bleed off pressure. now as the pin locks go they are easy to hook up. but the pin in center will stick and leak. but I know that I got a used one so I just deal with it. but thanks for asking.January 10, 2016Components are goodMakes it easy to hook up a pin lock keg. The hose and coupler come preassembled. Good for my kegerator. A clamp is included to make it easy to connect to the regulator.March 23, 2014A Must Have for keggingThis item works great with the pin lock kegs. plenty of line to route where ever you need to go. Great for building a kegerator with. This is for the CO2 to the keg.February 7, 2014Works wellThe gas line assembly works well, and it's less expensive to buy this complete piece than to make it yourself.December 30, 2013Good job of assembling itIt works well and is made of good materials._x000D_If your price out the pieces its a good deal, and MidWest build sit for you.November 11, 2013Not Bevlex Brand as Shown in PictureI ordered two 5/16" gas line assemblies to increase my kegging capacity to 4 kegs. While the tubing is serviceable, it is not the high quality, two-ply Bevlex tubing that came with my original 2 keg system, purchased through Midwest, or as shown in the picture. The tubing provided is a translucent/transparent red colored instead of opaque red like the Bevlex brand tubing. It is not nearly as flexible as Bevlex. It is made of a single-ply PVC construction and is quite stiff, particularly when at keg temperature. I expect it to break quickly.August 14, 2013Quality Product.I used this to add a second keg to my kegerator. Since the tubing comes pre-crimped, it's easy to connect and it works great. Would definitely buy again for another keg.July 27, 2013Almost too easy...This setup almost makes it too easy to connect CO2 to a pin lock keg. The hose and coupler come preassembled and a clamp is included to make hooking to the regulator a breeze.March 28, 2013Good quality componetsHigh quality line and connector, the worm clamp is stainless and of good quality. The only "weak" link in this setup is the pinch type clamp, the clamp is not a full 360 contact type and can leak with this soft type hose.March 20, 2013
- Customer Q&A