Blichmann ThruMometer™ In-line Thermometer - 3/8" Tube

  • The Blichmann ThrMometer Thermometer
The Blichmann ThrMometer Thermometer ThruMometer™ 3/8

Blichmann ThruMometer™ In-line Thermometer - 3/8" Tube

SKU 7512



Product Details

The ThruMometer™ from Blichmann Engineering™ is the first in-line thermometer. It's the ideal for monitoring wort temperature as it goes from your counterflow wort chiller to your fermentation vessel. Conceived especially for brewing, all interior surfaces of this thermometer are mirror-smooth, so there is nowhere for bacteria to hide, and it is easy to sanitize. Quick responding, the ThruMometer™ thermometer responds at the rate of 1 degree per second. Accurate to within 1 degree. Never needs calibrating. Used with any counterflow wort chiller (cannot be used with immersion chillers), the ThruMometer will help you avoid over-chilling your wort, and save water. Constructed of heat-treated corrosion-resistant aluminum alloy, will last a lifetime! Tubing with an inner diameter of 3/8 inches will fit the thrumometer.

Proposition 65 Warning for California Consumers: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Additional Information

SKU 7512

Customer Reviews

Based on 25 reviews
plate chiller

i use this in line with my shirron wort chiller works great

The best available tool

Its a must own with a plate chiller to know what your wort temperature is. Its accurate enough and fast enough for how it's used. And its easy to take care of, just clean right after using and then pump PBW through it when cleaning up.

Helps me when adjusting plate chiller temperatures

With winter water i can over cool my wort if I use the full tap pressure. I use the Thrumometer to let me know the adjusted temperature so I get my wort down to exactly the right pitching temperature. It's pretty accurate too, within a degree or so.

Thermometer for your wort

Its pretty good and there is nothing else, so I'm content with it. If you change the flow rate and that causes the temperature to fluctuate by a large amount, it will take the Thrumemoter a while to adjust. But a few degrees are much faster.

Its a little slow but it's still usable

I'd like it to react faster, but it still is useful. The only 2 alternatives are to either buy some very expensive lab equipment or save the wort in a container and measure it with a Thermapen. If this was faster I'd give another star.