Proposition 65 Warning for California Consumers: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
Customer ReviewsWrite a review
This works great for my two keg one regulator setup and the price was fair also.
This solid hunk of brass has been milled down to the great basic unit you see here! Probably the cheapest way to expand your gas system and just like any fitting remember to use thread tape! I always go the extra setup and dunk the finished pressurized unit in a rubber maid filled with water to make sure there isn't even the smallest of leaks. Some times you will be surprised with what you find!
I used this to put into my dual pressure regulator: one regulator is used for force carbing, and the other regulator has this splitter for drinking pressure for 2 kegs. I have 3 kegs on a dual regulator = awesome._x000D__x000D_If you are using this for a regulator, be sure to buy an additional ball check valve to attach the line to. You'll need another (the regulator already has one that you can use- this splitter replaces it's spot)
Cheapest way to split a gas line. I used for running the beer gun and keg off of the same tank. The manifolds work nicely too, but this is quick and cheap if you quickly need 2 lines from 1 CO2 tank.