DetailsThese Stainless Steel Tubing Clamps are durable, reusable, worm-gear style clamps that help ensure you have an secure connection between barbed fittings and tubing. These are a must when attaching gas lines, or any time you want to ensure a leak proof connection. A simple flat head screwdriver is all you need to tighten this clamp.
These clamps are adjustable and can accommodate tubing sizes from 1/8" to 1/2" OD.
- Details & Instructions
4.9 / 5.025 ReviewsGreat ClampI used this for my MLT to hold the 3/8" High Temp Tubing (H8110) on the valve and it worked. It was snug to get on but once it was on it was easy to work with.April 10, 2013Simple and work great.These clamps are simple, cheap, and do exactly what you need them to do. They were perfect for holding the tubing on my wort chiller, and I needed extra when I expanded my setup to include kegging. Highly recommended.April 18, 2013Like it over the other kind.This is a good product. I prefer it over your ear clamps that get locked in place. These you can take off and attach to different hoses to different fixtures which I find convenient. I had originally worried that there would be an issue with it not holding a seal as well as an ear clamp but I had worried in vain. Have not had any issues with tubing leaking on either gas or liquid lines. I would suggest buying a good amount of these, simply because I lose them alot so it's nice to have a few on hand if one walks off.May 16, 2013Locks hosing in placeWhen these are fastened snugly, they don't slip. They are easy to remove if you have to take equipment apart, and can then be retightened. I use these for all my liquid connections and the stainless steel resists corrosion.July 22, 2013Solid clamp, gets the job done!Easy to use, just the right size. No frills, just a solid clamp to secure your tubing! Cheap enough to have a few on standby!July 25, 2013easy to useI got a few of these to connect and clamp my keg tubing since they are reusable and very simple to install. You can probably grab these from a hardware store but these were convenient enough to throw a few in my order and skip a trip to the store.August 1, 2013handy worm screwI used these to clamp the tubing and fittings on the wort chiller I built. Nice and easy assembly, and will allow easy maintenance if I need to change out any pieces. Also less expensive than at my local hardware store.August 24, 2013Great product for smaller linesSimple to use, good quality; however, I would use the next size up for your gas lines - it's a really tight fit with these ones.August 31, 2013useful clampIts an easy to use worm clamp. It holds tight and can be removed and reused many times, which I've done. They are better than ear clamps.September 24, 2013
- Customer Q&A
Browse 1 question Browse 1 question and 1 answerWill these clamp down to 1/8" OD? I have a line that is about 3/16 OD. I doubt a clamp has a range of 1/8" to 1/2". That would mean it would spin around itself 3 times!
The picture is that of an Ideal Micro-Gear: http://idealtridon.com/aftermarket/micro-gear/
The smallest Ideal Micro-Gear is for ODs from 5/16 to 5/8 (one spin around a 5/16).
If you have a clamp that can indeed clamp 1/8" OD I need a few dozen. I don't think this is it though.BEST ANSWER: Yes, these will clamp hoses effectively from 1/8" - 1/2". I've never had an issue/leak with these in the specified range.