DetailsThe Anti-Gravity Transfer Pump is the ultimate tool for moving any and all liquids. Eliminate the back-breaking work of lifting heavy kegs, carboys, and coolers, simply by hooking up this new self-priming pump and flipping a switch. Chill out and drink a beer while your homebrew transfers smoothly from one vessel to another - the pump does all the work.
Transfer from primary to secondary, conical to keg, carboy to barrel… the possibilities are endless!
Works best with 5/16” tubing, but will also work with ⅜” tubing.
⅜” barbed and threaded inlet/outlet connections with integrated locking tubing collars
Max Flow: 1 GPM
Suction Ability: 5 Feet
8 ft. Cord
Max Lift: 150 Feet
Food Safe Head
Temp Rating: up to 140 degrees F
Voltage: 12v (Adapter included)
Integrated dampening mounting feet
- Details & Instructions
4.0 / 5.02 Reviewsconvenient, but I can’t get it not to foam the beer during transfer.October 30, 2018Purchased
1 month ago
- Customer Q&A
Browse 2 questions Browse 2 questions and 4 answerscan you bottle with this pump?BEST ANSWER: No, it is way too fast. i used it to transfer 5 gallons at a time from a 25 gal secondary into bottling bucket. About 2 and 1/2 minutes for nearly five gallonsDoes this pump disassemble for cleaning?BEST ANSWER: I did not try as there is usually little springs and such in a pump. I have two short pieces of hose on inlet and outlet openings. I run fresh water through it then some of my sanitizing solution. Then fresh water again. I also bought two little corks for ends of hoses. They keep solution from running out and keeps critters from playing house.