DetailsIntroducing Draft Brewer®, the first complete taproom in a box. Quick setup, minimal maintenance, and more time than ever to enjoy your craft.
The Draft Brewer® Twin System is ready out-of-the-box to get your taproom up and running. Start serving and sharing two brews within just days of receiving your new system.
Fully-assembled Draft Brewer® tap lines snap right on your keg. Enjoy your brew sooner and carbonate two kegs with a CO2 tank (not included) in 1-2 days instead of 2-4 weeks.
With the Twin System you can serve from two kegs at once for added variety on tap. Disconnect and swap in an already-carbed keg at any time! Plus, if you’re not serving you can carbonate two kegs at once.
Take the guesswork out of perfect carbonation. Adjust the pressure in real-time and guarantee perfect pours. The ultra-durable CO2PO® Dual-Gauge CO2 Regulator makes carbonation easier than ever. Hand-adjustable pressure knobs are twist-and-go. High-contrast gauges give you pressure information in a quick glance.
Best of all, it takes just a swish of sanitizer to prep your Draft Brewer® kegs for the next batch. Don’t just share your homebrew, share a lineup of it! Keep variety on tap with the dual-keg Draft Brewer® Twin System. Looking for more kegging options? See our full line up of Beer Kegs for Sale.
Includes everything except a CO2 tank to share and enjoy draft homebrew.
- Two Draft Brewer® 5-Gallon Kegs
- CO2PO® Dual-Gauge CO2 Regulator - Patent Pending
- Two-Way CO2 Distributing Manifold
- Two fully assembled gas lines & nylon washers to ensure tight seals
- Two fully assembled draft lines for pouring brew from your kegs
Proposition 65 Warning for California Consumers: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
- Details & Instructions
4.3 / 5.03 ReviewsProduct didn't match the pictureI have two of the kegs pictured. I ordered two more, and received two five-gallon kegs that did not match the pictures. They were different dimensions, different finish, had a "northern brewer" label rather than the "draft brewers" label, and - perhaps most importantly - rather than being stamped into the metal, the "in" and "out" indicators were in the form of stickers. I have not had them for long, but I imagine the stickers will fall off in time.
In the end they are still generally the same product, but I would really prefer when ordering something online that the product I receive matches the product pictured.June 5, 2019Purchased
3 weeks agoThe WeekenderI got this specifically for bringing to BBQs with friends. Plenty of beer and all I need was two kitchen size trash cans for ice and the beer stays cold all weekend.January 1, 2017Purchased
over 4 years agoGreat SystemI'm new to kegging my homebrew and this system came with everything (minus the NO2 bottle) I needed. The system works great with my kegerator and had the beer force carbonated in a week. Veterans to kegging may be able to find cheaper equipment, but I was able to get this on sale and getting everything I needed together eliminated my worries of compatibility issues.February 25, 2016
- Customer Q&A
Browse 3 questions Browse 3 questions and 10 answersWhat is the height and diameter of each keg?BEST ANSWER: Each is 25.25 inches tall, and 8.5 inches in diameter. With my draft lines attached at the top of the kegs, they need at least 26 inches clearance (height) to keep my keezer lid from touching the draft lines.What size tubing is used for the taps?Is this a ball lock system?BEST ANSWER: Yes. The fittings work like air compressor fittings. Just make sure you have
the pressure off the kegs and they quickly attach and detach