DetailsThe Wye Splitter is an inexpensive solution to splitting your CO2 at the regulator. Just swap this with the shutoff valve already on your regulator, and place the shutoff valve onto the open slot, and you will be able to distribute CO2 to two kegs.
- Details & Instructions
5.0 / 5.05 ReviewsEasy cheap addition to add a 2nd kegThis worked perfectly to split my CO2 output to two seperate kegs. To pressurize one I just turn off CO2 to one keg for 48 hours. I run almost all of my kegs at 8-10 PSI so not having independent pressure for each is not really a big deal. I don�?���t do a lot of stouts or porters which might require different pressure (not sure about this) but otherwise this works great.January 22, 2016Nice Piece of EquipmentI needed a way to control the Co2 input to two kegs , and this is perfect for my needs . I thought that I might have to fabricate something to fill the bill , but this did it . I'd never seen a manufactured "Y" fitting before .April 5, 2012great productgreat alternative to an expensive manifold and works great.October 16, 2012less cost than adding a regulatorSplitter works great, and cost less than another regulator, but a bit of a challenge to install on the dual regulator since there is not a lot of room for the wrench._x000D_March 12, 2013Quick and easyI needed an inexpensive way to run two gas lines from my regulator so I could have two kegs hooked up at the same time. The quality is great and the shut off valve makes it easy to disconnect one keg and keep the other in operation. The only downfall is that both kegs have to be at the same pressure but that's really not a big deal. Great product!February 17, 2014
- Customer Q&A